Locating the correct Fagor pressure cooker part restores your appliance’s function, avoiding a costly full unit replacement. It can feel frustrating when a single piece, like a worn gasket or a lost valve, sidelines your favorite kitchen helper. But finding genuine fagor pressure cooker parts is easier than you might think, and it’s totally worth the effort to get back to quick, delicious meals.
We’ve done the research so you don’t have to. This guide will walk you through the most common replacement parts, where to source them, and tips for ensuring a perfect fit. You’ll be pressure cooking again in no time, saving money and reducing waste—a win for you and your kitchen.
Product Comparison Table: 10 Best Fagor Pressure Cooker Parts
| Image | Why We Like This Product | Editor’s Rating | |
 |
Bonsicoky 2PCS Universal Pressure Cooker Relief Jigger Valve with…
|
9.8 |
Read Review |
 |
6Qt Power Cooker XL Replacement Inner Pot Stainless Steel…
|
9.6 |
Read Review |
 |
Original Pressure Release Valve Compatible with Power Cooker Pressure…
|
9.3 |
Read Review |
 |
ANAKEL HOME Replacement Handle Kit Compatible with Fagor Splendid…
|
9.1 |
Read Review |
 |
Anakel Home Replacement Handle Kit Compatible with Fagor Splendid…
|
8.9 |
Read Review |
 |
LoveIysp Pressure Cooker Handle; Kitchen Cooker Side Support Handle…
|
8.6 |
Read Review |
 |
2-pack 9-inch Fagor Compatible Replacement Pressure Cooker Silicone Sealing…
|
8.4 |
Read Review |
 |
Anakel Home Replacement Handle Kit Compatible with Fagor Rapid…
|
8.2 |
Read Review |
 |
Anakel Home Replacement Handle Kit Compatible with Fagor Rapid…
|
7.9 |
Read Review |
 |
XZW 2PCS Universal Removable Pot Handle Pot Lid Handle…
|
7.7 |
Read Review |
Quick Review For Top 10 Fagor Pressure Cooker Parts
Bonsicoky 2PCS Universal Pressure Cooker Relief Jigger Valve with Exhaust Rod, Safe and Anti-blocking, Regulator Weight Pressure Control 80KPA
The Bonsicoky 2PCS Universal Pressure Cooker Relief Jigger Valve is a replacement part designed to keep your pressure cooker functioning safely and efficiently. If your current jigger valve is worn, lost, or not performing correctly, this set provides everything you need for a straightforward replacement. It’s crucial to understand that this component is not just an accessory; it’s a key safety feature that regulates the internal pressure of your cooker.
This kit is comprehensive.
You receive two complete jigger valve assemblies, which includes the valve itself, a stainless steel anti-blocking cover, and an anti-blocking bracket. You also get a dedicated exhaust rod. Each valve measures approximately 28x38mm with a 10mm inner hole diameter. The construction focuses on durability and safety. The main body is made from thick, rust-proof stainless steel, built to last through many cooking cycles.
The valve head uses high-quality plastic, a considerate feature that prevents burns when you handle it after cooking. A thoughtful detail inside the inner hole is a small steel wire clamp. This clamp securely holds the exhaust rod in place, preventing it from accidentally falling out during use, which is a common annoyance with poorly designed valves.
Compatibility is a major point. This valve is universal for standard pressure cookers rated for 80KPA.
6Qt Power Cooker XL Replacement Inner Pot Stainless Steel Compatible with 6 Quart Power Pressure Cooker PPC770 PPC771 PPC770-1 PRO PCXL-PRO6 YBD60-100 WAL1 WAL2 Stainless Steel Inner Pot Parts – 6 QT
The Power Cooker XL 6Qt Replacement Inner Pot is designed specifically for owners of certain 6-quart Power Cooker XL models who need a new or spare cooking pot. If your original pot has seen better days or you simply want an extra for meal prep, this stainless steel inner pot is built to be a direct, functional replacement for your appliance.
First and foremost, compatibility is crucial.
This pot is made to fit the Power Cooker XL 6 Quart models: PPC770, PPC770-1, PPC771, PRO, PCXL-PRO6, WAL1, and WAL2. It also fits the model number YBD60-100. Please double-check your cooker’s model number before ordering. It is vital to note that this pot CANNOT be used in other brands of pressure cookers, such as Instant Pot, Crock-Pot, Yedi, Bella, or Farberware.
Even a small difference of a few millimeters in height will prevent a proper seal and safe operation, so using it in a non-compatible cooker is not recommended.
The construction of this pot focuses on durability and safety. It’s crafted from 18/8 (304 grade) stainless steel, which is a high-quality, food-safe material free from chemical coatings or concerning substances. The triple-ply bottom is designed for even heat distribution, which helps prevent hot spots during cooking.
Original Pressure Release Valve Compatible with Power Cooker Pressure Cooker XL Including PPC770, PPC773, PPC780, PPC790, PCXL-PRO6. Emeril Lagasse Pressure 6Qt 8Qt
The Original Pressure Release Valve Compatible with Power Cooker Pressure Cooker XL Including PPC770, PPC773, PPC780, PPC790, PCXL-PRO6. Emeril Lagasse Pressure 6Qt 8Qt is a crucial replacement part designed to restore the core function of your appliance. If your pressure cooker’s steam release handle is broken, lost, or not sealing properly, this valve is what you need to get cooking safely again.
It directly controls the pressure inside your pot, so having the correct, functional part is essential.
Compatibility is the most important detail here. This valve is made to fit a specific range of models. It works with several Power Cooker XL units, including the PPC770, PPC773, PPC780, PPC790, and the PCXL-PRO6. It is also compatible with Emeril Lagasse Pressure Cooker models like the PPC771 (6 qt), PPC772 (8 qt), and PPC772P (8 qt).
Please note the manufacturer’s important clarification: it fits SOME, but not ALL, Power Cooker models. They strongly advise you to check your own model number and the product dimensions before ordering to ensure a perfect fit. Using an incorrect valve can be a safety hazard.
The valve is constructed from high-quality, high-temperature resistant PP material. This means it’s built to withstand the heat and pressure of normal use without degrading.
ANAKEL HOME Replacement Handle Kit Compatible with Fagor Splendid 98 Pressure Cooker | Includes Pressure Regulator Valve, Screws and Lid (Thread Size of The Chimney: 0.31 in)
The ANAKEL HOME Replacement Handle Kit for the Fagor Splendid 98 Pressure Cooker is a comprehensive solution designed to restore the functionality and safety of your specific cooker model.
If the handle, lid, or regulator on your Fagor Splendid 98 has worn out or broken, this kit provides all the necessary components for a complete top assembly replacement, ensuring you can continue using your trusted pot without the need to purchase an entirely new one.
This is a complete kit specifically engineered for the Fagor Splendid 98. It includes a handle, lid, pressure regulator valve, chimney, locking indicator, and all the required screws and pieces.
Everything you need for the replacement is in the box, so you won’t have to search for extra parts. It’s important to note that the safety valve, which is part of the pot body itself, is not included in this handle and lid kit. The focus here is on replacing the entire top operating mechanism of your pressure cooker.
Durability and safety are central to this kit’s design. The main handle is constructed from Bakelite, a material chosen for its excellent resistance to high heat.
Anakel Home Replacement Handle Kit Compatible with Fagor Splendid 98 Pressure Cooker | Includes Pressure Regulator Valve, Screws and Lid (Thread size of the chimney: 0.23 in)
The Anakel Home Replacement Handle Kit is designed specifically for the Fagor Splendid 98 pressure cooker. If your trusty Fagor pot has a handle or lid assembly that’s seen better days, this complete kit provides a straightforward solution to restore it to full, safe functionality.
This is a comprehensive replacement pack for the top part of your cooker.
It includes all the components you need for a full refresh: a new handle, lid, pressure regulator valve, chimney, screw pieces and screws, and a locking indicator. You won’t have to source any extra parts, which makes the whole process much simpler. Please note, the kit does not include the safety valve, as that part is attached to the pot body itself, not the handle assembly.
Durability and safety are key here.
The main handle is crafted from Bakelite, a material chosen for its high heat resistance. This means you can grip it confidently even during high-temperature cooking without worrying about heat transfer. The design incorporates a yellow button that makes opening and closing the lid effortless, and the handle’s shape is ergonomic for a firm, comfortable hold.
LoveIysp Pressure Cooker Handle; Kitchen Cooker Side Support Handle – 2pcs
The LoveIysp Pressure Cooker Handle is a simple yet essential upgrade for your kitchen. If you’ve ever struggled with a loose, hot, or broken handle on your pressure cooker or stockpot, this two-pack of side support handles offers a straightforward solution. They’re designed to replace worn-out parts, making your existing cookware safer and more comfortable to use again.
Constructed from a combination of heat-resistant plastic and metal, these handles are built to last.
The materials are chosen specifically to withstand high temperatures, providing a safe, anti-scald grip. This means you can confidently move a hot pot without worrying about burning your hands. The durable construction ensures they won’t degrade quickly, even with regular use over a long period. The workmanship focuses on safety and function, with a design that effectively shields your fingers from steam and heat radiating from the pot’s sides.
Installation is refreshingly simple.
You don’t need any special tools or skills to attach them. They easily clip onto the side brackets of most standard pressure cookers, stockpots, steamers, and even larger pots like milk pots. Their lightweight design is a key feature; they provide a secure hold without adding any noticeable extra weight to your cookware, which makes handling much easier.
2-pack 9-inch Fagor Compatible Replacement Pressure Cooker Silicone Sealing Rubber Gasket by Puyong
The Puyong 2-pack 9-inch Fagor Compatible Replacement Pressure Cooker Silicone Sealing Ring is a straightforward solution for maintaining your stovetop pressure cooker. This product is specifically designed to replace the worn-out gasket on certain Fagor stainless steel models, helping to restore a proper seal for safe and efficient cooking.
It’s a two-pack, which is convenient because having a spare on hand means you’re never caught without a crucial part when your current ring needs replacing.
Before you consider this gasket, the most critical step is to check the size of your old one. This ring has an inner diameter of approximately 8.6 inches and is meant for a pot with an outer diameter of about 9 inches. You should physically measure the inner diameter of your current sealing ring to confirm it matches.
This gasket is intended for Fagor’s 4-quart, 6-quart, and 7-quart stainless steel pressure cooker pots. It’s compatible with many popular Fagor lines, including the Splendid, Rapida, Rapid Express, Duo, Elite, Futuro, Multi Rapid, and Express models.
It is equally important to note what this gasket does not fit. This part is not for electric pressure cookers, like Instant Pot or other brands.
Anakel Home Replacement Handle Kit Compatible with Fagor Rapid Express 99 Pressure Cooker | Includes Pressure Regulator Valve, Screws and Lid (Thread size of the chimney: 0.23 in)
The Anakel Home Replacement Handle Kit Compatible with Fagor Rapid Express 99 Pressure Cooker is designed for a very specific situation. If the handle, lid, or other top components of your trusted Fagor Express 99 cooker have broken or worn out, this kit provides a complete solution to restore it to full function. Instead of replacing the entire, often expensive, pot, you can replace just the parts that need it.
This is a comprehensive kit.
It includes everything for the top assembly: the main handle, the lid itself, the pressure regulator valve, the chimney, the necessary female pieces and screws, and the locking indicator system. You won’t need to source any additional parts, which makes the whole process straightforward. Please note, it does not include the separate safety valve.
The handle is crafted from heat-resistant Bakelite, a material chosen specifically to withstand the high temperatures of pressure cooking, giving you a secure and comfortable grip that stays cool to the touch.
Safety and ease of use are central to the design. The green button mechanism allows for quick and effortless opening and closing of the lid. The handle itself is ergonomically shaped to fit your hand comfortably, promoting a firm hold to help prevent accidental slips or burns.
Anakel Home Replacement Handle Kit Compatible with Fagor Rapid Express 99 Pressure Cooker | Includes Pressure Regulator Valve, Screws and Lid (Thread size of the chimney: 0.31 in)
The Anakel Home Replacement Handle Kit Compatible with Fagor Rapid Express 99 Pressure Cooker is designed to bring your trusted kitchen workhorse back to life. If the handle, lid, or other top components on your Fagor Express 99 have worn out or broken, this complete kit provides a straightforward solution.
It’s specifically engineered for models with a 0.31-inch (8 mm) thread size on the pressure cooker chimney, ensuring a perfect fit and restored functionality.
This is a full replacement kit for the top part of your cooker. It includes all the necessary components: the main handle, the lid itself, the pressure regulator valve, the chimney, the female pieces and screws, and the locking indicator system. You won’t need to source any extra parts, which makes the whole process much simpler.
Please note, the kit does not include the separate safety valve. Everything is designed for easy and quick installation. You can typically complete the replacement in just a few minutes with basic tools, getting you back to cooking your favorite meals without a long interruption.
Safety and comfort are key features of this kit. The handle is crafted from Bakelite, a heat-resistant material that withstands the high temperatures of pressure cooking, providing a secure grip.
XZW 2PCS Universal Removable Pot Handle Pot Lid Handle Replacement Parts Household Kitchen Utensils Fag Pressure Cooker Parts Single-Hole Black (2.72 * 2.48 * 0.9inch)
The XZW 2PCS Universal Removable Pot Handle Replacement Parts are designed to solve a common kitchen problem: a broken or missing handle on your favorite pot, lid, or pressure cooker. Instead of replacing the entire piece of cookware, this set offers a straightforward and economical fix.
It includes two single-hole handles in a classic black finish, each measuring approximately 2.72 by 2.48 inches, along with all the necessary screws and nuts for installation.
Constructed from a combination of high-quality bakelite and metal, these replacement handles are built to last. The materials are chosen for there excellent durability and heat resistance, ensuring they remain sturdy and reliable even during long cooking sessions.
You won’t have to worry about the handle becoming too hot to touch under normal use, which adds a layer of safety and comfort to your kitchen routine.
Comfort is a key focus in the design. The handle is shaped ergonomically to fit naturally in your hand, providing a secure and comfortable grip without adding noticeable weight to your pot. This makes it very suitable for daily tasks, from lifting a heavy soup pot to adjusting a lid while simmering.
Fagor Pressure Cooker Parts Buying Guide
Fagor pressure cooker parts must match your model exactly for safe and proper operation. Using teh wrong part isn’t just inconvenient—it can be a safety risk. This guide helps you find the right replacement quickly, so you can get back to cooking with confidence.
Identify Your Model Number
This is the most crucial step. Your model number is usually on a sticker or engraved on the bottom of the cooker’s base. Have this number ready before you search. It’s the only way to guarantee compatibility, as parts can vary even between similar-looking Fagor models.
Prioritize Safety Components
Parts like the pressure regulator, gasket (sealing ring), and overpressure plug are vital for safety. They wear out over time. If your cooker isn’t sealing or pressurizing correctly, these are the first parts to check. Always replace them with genuine or certified-compatible parts.
Consider Material and Build
Are you replacing a pot, a lid, or a rack? Check if it’s made of stainless steel or aluminum to match your existing cooker. Quality matters here—a well-made pot ensures even heating, and a sturdy lid maintains the essential seal. Don’t compromise on durability for these core components.
Source from Reputable Sellers
Look for authorized parts dealers or well-reviewed kitchen suppliers. They provide accurate compatibility charts and sell parts that meet Fagor’s specifications. It’s worth paying a little more from a trusted source to ensure you’re cooker functions safely and lasts for years to come.
Frequently Asked Questions About Fagor Pressure Cooker Parts
Where can I buy genuine replacement parts?
You can buy them directly from Fagor’s website or from authorized retailers. This is teh best way to ensure you get a part that fits perfectly and is safe to use. Avoid generic parts from unknown sellers, as they might not work correctly.
How do I know which part I need?
First, find your pressure cooker’s model number. It’s usually on the bottom of the pot or on the lid. Then, you can check the parts diagrams on Fagor’s support site. These diagrams show every part for your specific model, which makes ordering much easier.
Are parts from older models still available?
Many parts for discontinued models are still available. Fagor keeps a good inventory of common parts like gaskets and valves. It’s always worth checking their website or contacting their customer service to see if your part is in stock.
What parts should I replace regularly?
The sealing ring, or gasket, is the part you’ll replace most often. It wears out over time and can effect the cooker’s ability to pressurize. You should also check the safety valve and overpressure plug for any damage. Replacing these keeps your cooker working safely.
Can I replace parts myself?
Yes, most replacements are simple. Things like the gasket, steam release valve, and handles are designed for easy home replacement. Always make sure your cooker is completely cool and follow the instructions that come with the new part. For more complex issues, consulting the manual is a good idea.
Why is my new sealing ring seem stiff?
A new sealing ring can feel stiff at first. This is normal. Just wash it with warm, soapy water before its first use. After a few cooking cycles, it will soften up and form a perfect seal with your pot.
What if my part doesn’t fit or work?
If a genuine Fagor part doesn’t fit, double-check the model number you ordered for. Mistakes can happen. Contact the seller or Fagor’s customer support. They can help sort out the issue and get you the correct part.
What to Remember
Keeping your meals on schedule means maintaining your cooker with genuine, properly fitting replacement parts. Using teh right components ensures safety and consistent results every time you cook. It also extends the life of your main unit, protecting your investment. Think of it as simple, routine care for a trusted kitchen helper.
When it’s time for a new seal or valve, always choose official fagor pressure cooker parts. They are designed to match your model’s specifications perfectly. This guarantees a secure fit and reliable performance. With the correct parts, you can trust your cooker to work safely and efficiently for many more meals to come.