Replacing a control board on a Whirlpool oven involves both the part cost and potential labor fees if you hire a technician. So, how much is a control board for a Whirlpool oven? Most homeowners pay between $150 and $400 for the part alone, while total repair costs with labor usually land between $250 and $550.
That range can feel wide, and thats because it is. The exact price depends on your oven model, where you buy the part, and whether you do the job yourself. This guide breaks down every cost factor so you can budget with confidence.
How Much Is A Control Board For A Whirlpool Oven
The control board, sometimes called the electronic control board or clock board, is the brain of your oven. It manages temperature, timers, bake and broil cycles, and the display. When it fails, your oven may not heat, may heat unevenly, or may show error codes.
Here is the typical price breakdown you can expect:
- Replacement control board part only: $150 to $400
- Labor cost from a technician: $100 to $200
- Total installed cost: $250 to $550
- DIY total cost: $150 to $400 (part only)
Basic models with simple controls sit at the low end. High-end Whirlpool ranges with touchscreens, convection settings, or Wi-Fi features push the part price higher.
What Drives The Price Up Or Down
Several things change the final number you pay. Knowing them helps you avoid overpaying.
- Oven model and age: Older or discontinued models may have scarce parts that cost more.
- Control board type: A simple knob-style board is cheaper than a digital touch panel.
- Where you buy: OEM parts from Whirlpool cost more than aftermarket boards.
- Warranty status: If your oven is under warranty, the part may be free.
- Labor rates: Technician fees vary by city and by company.
If your oven is still under the manufacturer warranty, call Whirlpool first. A covered repair could cost you nothing out of pocket. For extended warranties through a retailer, check those terms too.
OEM Vs Aftermarket Control Boards
You have two main choices when buying a replacement board.
OEM stands for original equipment manufacturer. These boards come straight from Whirlpool or an authorized dealer. They fit perfectly and carry a warranty, but they cost more. Expect $200 to $400 for most models.
Aftermarket boards are made by third-party companies. They often cost $100 to $250. Quality varies, so read reviews before buying. Some work great for years. Others fail within months.
For most people, OEM is the safer bet if the oven is newer. For an older oven you plan to replace soon, aftermarket can save money.
Labor Costs For A Whirlpool Oven Control Board Replacement
If you hire a pro, labor is the second big cost. Most technicians charge a flat rate for this repair, plus a service call fee.
- Service call fee: $50 to $100
- Flat labor rate: $100 to $200
- Total labor: $150 to $300
Some companies waive the service call fee if you approve the repair. Always ask about this before booking. It can save you $75 or more.
The repair itself usually takes 30 to 60 minutes. Its not a long job, which is why many homeowners choose to do it themselves.
When To Hire A Technician
DIY is tempting because the part is the biggest cost. But its not right for everyone. Hire a pro if:
- Your oven is still under warranty (DIY can void it)
- You are not comfortable working with wiring
- The oven is a built-in wall model that is hard to pull out
- You want a guarantee on the work
If none of those apply, DIY can save you $150 to $300. The job is moderate in difficulty. You need basic tools and patience.
How To Replace A Whirlpool Oven Control Board Yourself
Before you start, unplug the oven or flip the breaker. Gas ovens need the gas valve shut off too. Safety first, always.
- Pull the oven away from the wall so you can reach the back panel.
- Remove the screws holding the rear access panel. Set them aside in a cup.
- Take a photo of the wiring before you touch anything. This is your map.
- Label each wire with tape and a marker if the photo is not enough.
- Disconnect the wire harnesses from the old board. They usually clip off.
- Remove the mounting screws that hold the board in place.
- Slide the old board out and set the new one in.
- Reconnect every wire exactly as shown in your photo.
- Reattach the panel and screws.
- Plug the oven back in and test bake, broil, and the display.
If the display lights up and the oven heats, you did it. If not, double check the wire connections. A loose harness is the most common mistake.
Tools You Will Need
- Phillips head screwdriver
- Nut driver set
- Phone camera for photos
- Masking tape and a marker for labels
- Work gloves
Total tool cost if you own nothing: about $30. Most households already have these items.
Signs Your Whirlpool Oven Control Board Is Bad
Not every oven problem means a new board. Know the real symptoms before you spend money.
- The display is blank or shows random characters
- Buttons do not respond when pressed
- The oven wont heat at all, but the stovetop works
- Error codes appear, like F1, F3, or F9
- The oven overheats or burns food repeatedly
- The timer beeps nonstop or resets on its own
Some of these issues come from a bad temperature sensor or a loose wire instead. Test those cheaper parts first. A sensor costs $20 to $50. If it fixes the problem, you saved hundreds.
Is It Worth Replacing The Board
Use the 50 percent rule. If the repair cost is more than half the price of a new oven, think twice. A new Whirlpool range runs $600 to $1,200.
If your oven is under 8 years old and in good shape, repair makes sense. If its older and you have had other failures, a new oven may be the smarter buy.
Ways To Save Money On The Repair
You do not have to pay full price. Try these tips.
- Search your model number on Whirlpool’s site for the exact part.
- Check sites like RepairClinic, PartsSelect, and Amazon for price gaps.
- Look for refurbished boards with a warranty.
- Ask a local tech for a cash price or a waived service fee.
- Compare at least three quotes before you book anyone.
Prices swing a lot between sellers for the same board. Ten minutes of comparing can save you $50 or more.
Final Cost Summary
So how much is a control board for a Whirlpool oven? Plan on $150 to $400 for the part. Add $150 to $300 if you hire a technician. Most people end up paying $250 to $550 total.
Do it yourself and you cut the bill nearly in half. Hire a pro and you get peace of mind plus a warranty on the work. Either way, knowing the numbers keeps you from getting overcharged.