Whirlpool ovens ship with Celsius settings in some regions, and switching to Fahrenheit takes only a few button presses. If you want to know how to change whirlpool oven from celsius to fahrenheit, the good news is that most models use the same basic control panel logic. You do not need a technician, a manual from 1998, or any special tools. Just your fingers and about thirty seconds.
Below you will find the exact steps for the most common Whirlpool oven control panels. I also cover what to do when the buttons act up, and how to tell which control style your oven uses.
How To Change Whirlpool Oven From Celsius To Fahrenheit
The method depends on the type of control panel on your oven. Whirlpool has used several designs over the years, but they fall into three main groups. Find your panel type below and follow the matching steps.
Method 1: Settings Menu On Modern Touch Panels
Most Whirlpool ovens made after 2015 use a touch control with a Settings or Tools menu. This is the easyest method of the three.
- Press the Settings or Tools button on the control panel.
- Scroll through the list until you see Temperature Units, Temp Units, or just Units.
- Press it, then choose Fahrenheit from the options.
- Press Save, OK, or Start to lock in the change.
- Wait a few seconds. The display should now show temperatures like 350 instead of 175.
On some models the menu is called Preferences instead of Settings. Same idea, same steps.
Method 2: Bake And Broil Button Combo
Older Whirlpool ovens with membrane keypads often hide the unit toggle behind a button combo. It is not printed in the manual half the time, which is why so many people get stuck.
- Make sure the oven is off and the clock is showing.
- Press and hold the Bake button for about five seconds.
- While holding Bake, press the Broil button once.
- The display will flash C or F.
- Press the Up or Down arrow until F shows.
- Press Start to confirm.
If that combo does nothing, try holding Bake and pressing the Clock button instead. Some Whirlpool ranges use that pairing.
Method 3: Clock And Timer Buttons
A few Whirlpool models put the unit setting behind the clock controls. This shows up a lot on freestanding ranges with a small LED display.
- Press and hold the Clock button for three to five seconds.
- Release when the display starts blinking.
- Press the Timer or Timer On/Off button within two seconds.
- Use the arrow keys to switch between C and F.
- Press Clock again to save the setting.
If the display just changes the time, you held Clock too long. Start over and release sooner.
What To Check Before You Start
A little prep saves you from repeating the steps twice. Run through this short list first.
- Confirm the oven is in standby mode, not actively baking or in a self clean cycle.
- Check that the control lock is off. A small lock icon on the display means the buttons are disabled.
- Write down your model number from the sticker inside the oven door. You may need it if the steps fail.
- Make sure the oven has power. Sounds obvious, but a tripped breaker causes a lot of false alarms.
If The Buttons Do Not Respond
Sometimes the panel ignores your presses. Here is what to try, in order.
Reset The Control Board
Turn off the oven at the breaker for one full minute. Then turn it back on. This clears a stuck setting and often fixes unresponsive buttons. It also resets the temperature unit on some models, so check the display afterward.
Turn Off Control Lock
Press and hold the Control Lock or Lock button for three seconds. The lock icon should disappear. After that, retry the method for your panel type.
Check For A Child Lock Or Demo Mode
Demo mode keeps the display lit but disables heating and some menu functions. If your oven shows a demo message, exit it through the Settings menu before changing units.
Why Some Whirlpool Ovens Stay In Celsius
Whirlpool sells the same oven platform in many countrys. Units are set at the factory based on the destination region. If your oven came from Canada or Europe, it likely left the plant in Celsius. The setting is stored in the control board memory, so it survives power outages. That is why the oven keeps coming back to Celsius even after you unplug it.
On a small number of models, the unit is fixed in the firmware and cannot be changed from the panel. In that case, you have two options. You can convert temperatures yourself using a simple formula, or you can call Whirlpool support and ask if a service tech can flash the board. The conversion math is easy. Multiply Celsius by 1.8 and add 32. So 180 C becomes 356 F, which you would set as 350 F for most recipes.
Quick Conversion Chart For Cooking
Keep this handy if your oven is stuck in Celsius for now.
- 150 C equals 300 F
- 160 C equals 320 F
- 175 C equals 350 F
- 190 C equals 375 F
- 200 C equals 400 F
- 220 C equals 425 F
Round to the nearest 25 degrees when you set the oven. It will not make a noticeable difference in most baking and roasting.
Final Tips For A Smooth Switch
After you change the setting, run a quick test. Set the oven to 350 F and let it preheat. If the display counts up in Fahrenheit and the oven beeps at the right time, you are done. If it reverts to Celsius after you turn it off, the board is not saving the change. Try the breaker reset once more. If it still fails, note your model number and contact Whirlpool support. They can tell you whether your specific model supports the change or needs a board replacement.
One more thing. After a power outage, check the display. Some ovens default back to Celsius when power returns. A quick glance saves you from baking a cake at 175 degrees when you meant 350.